Audio
Receivers & Amplifiers
Video
Video Furniture
- Sound Bars
- Powered Home Theater Systems
- Surround Sound Speaker Systems
Multi-channel Amplifier
AudioSource AD1002
In stock
- 50 watts per channel into 8 ohms (10-30,000 Hz) at 1% THD with 2 channels driven
- 160 watts when bridged into a single 8-ohm load
- 75 watts into 4 ohms
- high-efficiency switching amplifier design
- front-panel volume and balance controls
- A/B speaker switching
- rear-panel bass and treble controls (± 12dB @ 100 Hz and 10,000 Hz)
- main and secondary (“Interrupt”) audio line inputs with automatic source switching
- loop output on the main line input passes that audio signal on to another amp, giving you flexibility in designing a multi-room system
- signal sensing “Power On” and Trigger mode
- auto on select switch allows manual or signal sensing power on/off
- total harmonic distortion: less than 1%
- frequency response: 10-30,000 Hz (-2 dB, +1 dB)
- signal-to-noise ratio: 100 dB
CALL FOR YOUR BEST PRICE
AudioSource AD5012
In stock
- 12-channel amplifier with 6 independent playback zones
- play the same source through all 6 zones, or have a different source play in each one
- 50 watts per channel into 8 ohms (20-20,000 Hz) at 0.2% THD with all channels driven
- 75 watts per channel into 4 ohms
- 125 watts x 6 bridged into 8 ohms (at 1 kHz)
- high-efficiency switching amplifier design
- Over Temperature Protection (OTP) gently reduces power if temperature gets too high, preventing shutoff
- Over Current Protection (OCP) differentiates between a direct short and a dynamically low speaker impedance
- detachable Phoenix-style speaker connectors
- optical digital input for connecting a TV, CD player, or network streaming device (accepts 2-channel PCM only; not compatible with Dolby Digital or DTS)
- rear-panel bass and treble controls
- rear-mounted, independent level controls for each channel
CALL FOR YOUR BEST PRICE
AudioSource AD508
In stock
- 65 watts per channel into 8 ohms (20-20,000 Hz) at 0.2% THD with all channels driven
- 100 watts x 8 into 4 ohms
- 200 watts x 4 bridged into 8 ohms (at 1 kHz)
- 8-channel amplifier with 4 independent playback zones
- play the same source through all 4 zones, or have a different source play in each one
- high-efficiency switching amplifier design
- Over Temperature Protection (OTP) gently reduces power if temperature gets too high, avoiding shutoff
- Over Current Protection (OCP) differentiates between a direct short and a dynamically low speaker impedance
- optical digital input for connecting a TV, CD player, or network streaming device (accepts 2-channel PCM only; not compatible with Dolby Digital or DTS)
- rear-panel bass and treble controls
- rear-mounted, independent gain controls for each channel
- Bus 1 and Bus 2 RCA inputs can be assigned to any channel so that different sources are available for each zone
- each pair of bus inputs has a corresponding output that can be daisy-chained to another amplifier
CALL FOR YOUR BEST PRICE
AudioSource AMP1200VS
In stock
- 40 watts per channel into 4 or 8 ohms (20-20,000 Hz) at 0.2% THD with all channels driven
- 80 watts x 6 into 8 ohms bridged
- 12-channel amplifier with 6 independent playback zones
- play the same source through all 6 zones, or play a different source in each zone
- high-efficiency switching amplifier design
- extensive internal circuitry protects against overheating
- detachable speaker connectors
- rear-mounted independent gain controls for each channel
- Bus 1 and Bus 2 RCA inputs can be assigned to any channel so that different sources are available for each zone
- each pair of bus inputs has a corresponding RCA output that can be daisy-chained to another amplifier
- discrete pair of RCA inputs for each zone
- flexible power modes include on/off, signal-sensing, and 12-volt trigger
- rack-mountable with included hardware
- frequency response: 10-50,000 Hz (+0 dB, -3 dB)
- signal-to-noise ratio: 100 dB
- 16-1/2″W x 4″H x 14-1/4″D
CALL FOR YOUR BEST PRICE
AudioSource AMP210VS
In stock
- 100 watts per channel into 8 ohms (10-30,000 Hz) at 0.2% THD with 2 channels driven
- 125 watts into 4 ohms
- 250 watts when bridged into a single 8-ohm load
- high-current Class AB amplifier design
- ideal for use as a second zone amplifier
- front-panel volume and balance controls
- front-panel A/B speaker switching
- rear-panel bass and treble controls
- main and secondary (“Interrupt”) audio line inputs with automatic source switching
- loop output on the main line input passes that audio signal on to another amp, giving you flexibility in designing a multi-room system
- speaker-level input allows integration into an existing system where no RCA level signal is present
- master volume feature allows installer to set maximum volume so connected speakers cannot be distorted or damaged
- adjustable delay so that the amp doesn’t switch to another source at the end of a song
CALL FOR YOUR BEST PRICE
AudioSource AMP310VS
In stock
- 150 watts per channel into 8 ohms (10-30,000 Hz) at 0.2% THD with 2 channels driven
- 225 watts x 2 into 4 ohms
- 450 watts (mono) in bridged mode
- high-current Class AB amplifier design
- ideal for use as a second zone amplifier
- front-panel volume and balance controls
- front-panel A/B speaker switching
- rear-panel bass and treble controls
- main and secondary (“Interrupt”) audio line inputs with automatic source switching
- loop output on the main line input passes that audio signal on to another amp, giving you flexibility in designing a multi-room system
- speaker-level input allows integration into an existing system where no RCA level signal is present
- master volume feature allows installer to set maximum volume so connected speakers cannot be distorted or damaged
- adjustable delay so that the amp doesn’t switch to another source at the end of a song
CALL FOR YOUR BEST PRICE
AudioSource AMP800VS
In stock
- 40 watts per channel into 8 ohms (20-20,000 Hz) at 0.2% THD with all channels driven
- 80 watts x 4 into 8 ohms bridged
- 8-channel amplifier with 4 independent playback zones
- play the same source through all 4 zones, or play a different source in each zone
- high-efficiency switching amplifier design
- extensive internal circuitry protects against overheating
- detachable speaker connectors
- rear-mounted independent gain controls for each channel
- Bus 1 and Bus 2 RCA inputs can be assigned to any channel so that different sources are available for each zone
- each pair of bus inputs has a corresponding RCA output that can be daisy-chained to another amplifier
- discrete pair of RCA inputs for each zone
- flexible power modes include on/off, signal-sensing, and 12-volt trigger
- rack-mountable with included hardware
- frequency response: 10-50,000 Hz (+0 dB, -3 dB)
- signal-to-noise ratio: 100 dB
- 16-3/4″W x 4″H x 16-1/4″D
- weight: 27 lbs.
- warranty: 3 years
CALL FOR YOUR BEST PRICE
Bowers & Wilkins ISW4
In stock
Original price was: $1,200.00.$1,140.00Current price is: $1,140.00.Description:
- ideal for a discreet home theater or stereo music system
- dual 8″ hybrid paper/aramid fiber woofers
- frequency response: 21-200 Hz
60-day returns and more:
- 60-day returns
- 60-day price-drop protection
- Free lifetime tech support
- Up to 1,200 rewards points
Bowers & Wilkins Performance Series CCM663
In stock
Original price was: $1,200.00.$1,140.00Current price is: $1,140.00.Description:
- 6″ aramid fiber woofer
- 1″ aluminum dome tweeter can be tilted toward your listening area
- frequency response: 45-50,000 Hz
60-day returns and more:
- 60-day returns
- 60-day price-drop protection
- Free lifetime tech support
- Up to 1,200 rewards points
Bowers & Wilkins Performance Series CCM663RD
In stock
Original price was: $1,350.00.$1,282.00Current price is: $1,282.00.Description:
- reduced-depth design accommodates mounting locations with limited mounting space
- 6″ blue Kevlar® cone bass/midrange driver with 1″ Nautilus™ aluminum dome tweeter
- frequency response: 35-50,000 Hz
60-day returns and more:
- 60-day returns
- 60-day price-drop protection
- Free lifetime tech support
- Up to 1,350 rewards points
Bowers & Wilkins Performance Series CCM663SR
In stock
Original price was: $825.00.$783.00Current price is: $783.00.Stereo-input in-ceiling speaker
Description:
- 6″ aramid fiber woofer and dual 1″ soft dome tweeters
- stereo-input speaker plays both the left and right channels of the stereo mix
- frequency response: 48-30,000 Hz
60-day returns and more:
- 60-day returns
- 60-day price-drop protection
- Free lifetime tech support
- Up to 825 rewards points
Bowers & Wilkins Performance Series CCM664SR
In stock
Original price was: $574.00.$545.00Current price is: $545.00.Description:
- 6″ glass-fiber woofer and dual 1″ soft dome tweeters
- stereo-input speaker plays both the left and right channels of the stereo mix
- frequency response: 48-30,000 Hz
60-day returns and more:
- 60-day returns
- 60-day price-drop protection
- Free lifetime tech support
- Up to 574 rewards points