Bowers & Wilkins Performance Series CWM663

Product Info:

• ideal for an in-wall music system, or as the front- or rear-channel speakers of a Bowers & Wilkins home theater system
• 6″ aramid fiber woofer
• 1″ soft dome tweeter
  • three-position switch optimizes high-frequency output to best suit the acoustics of your room
• frequency response: 45-50,000 Hz (-6 dB)
• recommended amplifier power: 25 to 150 watts
• sensitivity: 88 dB
• magnetic grille is paintable to match your décor
• cutout dimensions: 7-1/4″W x 11″H
• overall dimensions: 8-3/4″W x 12-7/16″H
• mounting depth: 3-3/4″
• warranty: 5 years
• MFR # FP29661
• Item # 749CWM663
  

  Specs:

  Features
  Quantity in Package	Pair
  Tweeter	Soft-Dome
  Aimable Tweeter	No
  Woofer Composition	Kevlar
  Woofer Surround	Rubber
  Connector Type	Spring post
  Bi-Amp Inputs	No
  Built-in Back-box	No

  Moisture Resistance
  Indoor (Moisture-resistant)	No
  Outdoor (Partial Exposure)	No
  Outdoor (Full Exposure)	No

  Specs
  Tweeter Size	1
  Midrange Size	N/A
  Woofer Size	6
  Speaker Shape	Rectangle
  Cutout Width	7.25
  Cutout Height	11
  Mounting Depth	3.75
  Power Range (Watts)	25-150
  Sensitivity	88 dB
  Impedance (Ohms)	8
  Frequency Response	45-50kHz
  Parts Warranty	5 Years
  Labor Warranty	5 Years

  Features

  Two-Way Driver Design: The Bowers & Wilkins CWM663 in-wall loudspeaker utilizes a two-way driver design featuring a 1″ soft-dome tweeter and a 6″ Kevlar cone woofer with rubber surround for clear highs, detailed midrange, smooth midbass, and deep bass response.

  High-Frequency Level Switch: A 3-position high frequency level switch is located on the front baffle of the in-wall loudspeaker. The center position of the switch gives a normal level high frequency response. The HF+ boost position can be useful where the listening environment is acoustically absorbent, for instance where carpets, soft furnishings and curtains predominate, or where the speakers are covered by curtains or wall hangings. The HF- cut position may be preferred where the listening environment is acoustically reflective, for instance where hard floors and glass predominate.

  Spring-Post Terminals: The B&W CWM663 in-wall loudspeaker is outfitted with spring-post terminals that will accommodate bare speaker wire (up to 12AWG), pin connectors, and banana plugs (single only).

  Magnetic & Paintable Grilles: The Bowers & Wilkins CWM663 includes easy-to-install magnetic grilles that are also paintable. The grille protrudes 0.25″ from the wall.

  In-Wall Installation: The B&W CWM663 requires a rectangular cutout and is secured in the wall via the included mounting frame with integrated “QuickDogs” spring-loaded clamps that tighten using phillips-head screws. The cutout will need to measure 7.25″ (w) x 11″ (h) x 3.75″ (d). Make sure there is a least 0.75″ of clearance around the cutout opening for the integrated “QuickDogs” clamps. The mounting clamps will accommodate 0.25″ to 1″ thick drywall.

  Note: Before installing CWM6 Series in-wall speakers you should ensure that the wall locations chosen are free of obstructions such as pipe work, ducting or wiring that will interfere with the installation. In existing drywall construction, use a stud-finding tool to help you map the wall construction and a pipe detector to scan the proposed installation locations.

  Applications: The Bowers & Wilkins CWM6 Series in-wall loudspeakers are suited for distributed audio, 2-channel stereo, and multi-channel home theater applications.

  • Distributed Audio: For applications where single CWM6 Series speakers are required to operate independently to provide background audio, they can be mounted as installation convenience and architecture dictate. The only acoustic constraint to bear in mind is that corner locations will result in significantly emphasized low frequencies and should be avoided.
  • 2-Channel Stereo: For applications where a pair of CWM6 Series speakers is to be used for conventional stereo reproduction, they should be located between 10′ and 16.5′ apart and a similar distance in front of the listening area.
  • Home Theater: For applications where multiple CWM6 Series speakers are to be used for multi-channel home theater system, the left and right front speakers should be located either side of the screen approximately 20″ away. The center channel speaker should be located either directly above or below the screen or, in the case of an acoustically transparent screen, directly behind. Surround channel CWM6 Series speakers should be located just behind and either side of the listening position.

  Notes:

  • Try to avoid corner locations for any of the speakers and to ensure that the acoustic environment around each speaker is similar.
  • The nature of the installation of in-wall speakers means that it is sometimes impractical to locate them in the acoustically ideal positions. In these cases they should be located as close as is practical to the ideal positions.
    

    What’s in the box:

    • Bowers & Wilkins Performance Series CWM663 owner’s manual If you need assistance accessing this owner’s manual, please give us a call.
    • 2 In-wall loudspeakers
    • 2 Mounting frames
    • 2 Grilles
    • 2 Paint mask
    • 2 Cut-out templates
    • Quick Start Guide
    • Template
    • Warranty Information