Bowers & Wilkins Reference Series CCM7.5 S2

Product Highlights:

Separate amplifier required.

Product Info:

• ideal for an elite in-ceiling music system, or as part of a Bowers & Wilkins home theater system
• drivers are mounted at an angle to direct sound toward your seating position
• 1″ carbon dome tweeter
• 7″ Continuum cone midrange/bass driver
• frequency response: 32-28,000 Hz (±3dB)
• recommended amplifier power: 25 to 150 watts
• nominal impedance: 8 ohms
• sensitivity: 90 dB
• magnetic grille is paintable to match your décor
• speaker cutout diameter: 10″
• overall diameter: 11-7/16″
• mounting depth: 5″
• weight: 6.9 lbs.
• warranty: 5 years
• 60-day returns
• MFR # FP41114
• Item # 749CCM75S2

Specs:

Features

Angled 2-Way Driver Design: The Bowers & Wilkins CCM7.5 S2 features a 1″ Carbon dome tweeter and 7″ Continuum cone midbass driver angled to the mounting surface, allowing for easy direction of the whole array towards the main listening area to ensure you hear the correct balance of sound. The 1″ Carbon dome tweeter delivers pinpoint imaging accuracy and detail, while the 7″ Continumm cone woofer provides smooth and accurate bass without distortion.

Spring-Post Terminals: The B&W CCM7.5 S2 in-ceiling loudspeaker is outfitted with spring-post terminals that will accommodate bare speaker wire (up to 12AWG), pin connectors, and banana plugs (single only).

Magnetic & Paintable Grilles: The Bowers & Wilkins CCM7.5 S2 in-ceiling loudspeaker includes easy-to-install magnetic grilles that are also paintable. The grille protrudes 0.3125″ from the ceiling.

In-Ceiling Installation: The B&W CCM7.5 S2 requires a round cutout and is secured in the ceiling via the included mounting frame with integrated “QuickDogs” spring-loaded clamps that tighten using phillips-head screws. The cutout will need to measure 10″ (diameter) x 5″ (depth). Make sure there is a least 0.75″ of clearance around the cutout opening for the integrated “QuickDogs” clamps. The mounting clamps will accommodate 0.25″ to 1.5″ thick drywall.

Applications: Designed for down-firing, in-ceiling use, the B&W CCM7.5 S2 can be used as a front, center, or rear channel speakers in a home theater system. It can also be used in a stereo or distributed audio application.

• Home Theater: When used as front channels, the left and right speakers should be located on either side of the screen approximately 20″ away. When used as a center channel, the speaker should be located directly above the screen. As rear surround channels, the speakers should be located just behind and one either side of the listening position.
• 2-Channel Stereo: For applications where a pair of CCM7.5 S2 speakers are to be used for conventional stereo reproduction, they should be located between 10′ and 16.5′ apart and a similar distance in front of the listening area.
• Distributed Audio: For applications where single CCM7.5 S2 Series speakers are required to operate independently to provide background audio, they can be mounted as installation convenience and architecture dictate. The only acoustic constraint to bear in mind is that corner locations will result in significantly emphasized low frequencies and should be avoided.

What’s in the box:

• Bowers & Wilkins Reference Series CCM7.5 S2 owner’s manual If you need assistance accessing this owner’s manual, please give us a call.
• In-ceiling loudspeaker
• Mounting frame
• Grille
• Paint shield
• Cutout Template
• Installation Instructions
• Warranty Information